Remove your existing toilet seat, then turn off the water supply and drain the tank by flushing the toilet.

Disconnect the water supply hose from the toilet tank fill valve

Connect your T-valve to the toilet tank fill valve, then reconnect the water supply hose to the bottom of the T-valve.

Place the bidet on the back of the toilet so that the nozzles are centered in the bowl thenline up the adjustable bracket with the bolt holes.

Place your toilet seat on top of your
SHATTAF 2.0 and secure it using original hardware.

Connect both ends of the bidet hose to the open side of the T-valve and to the water inlet of your SHATTAF 2.0

Check that connections are properly secured, and slowly turn the water supply back on while checking for leaks