0
WORLDWIDE SHIPPING
FREE Delivery on Orders Above 20$ in LB
+إيكوكلين
+إيكوكلين
+إيكوكلين
+إيكوكلين
+إيكوكلين
+إيكوكلين
+إيكوكلين
+إيكوكلين

+إيكوكلين

Sale
-29%
$69.99 USD $49.99 USD
Quantity

Product Features

Modern Design:
  • Slim design for minimal seat interference
  • Slides under the toilet seat
  • Fits round and elongated toilets
  • Easy to operate with clear text & good grip dial
  • Everything included for standard install
Perfect Wash:
  • Separate front and rear nozzles
    Rear wash is for everyone's backside, targeted to hit the right spot
  • Front wash is angled slightly forward with a softer spray pattern
  • Precise pressure control, from a soft spritz to full pressure
    Ambient water temperature

Safe and Sanitary:

  • Self-rinsing system runs fresh water over both nozzles before and after each use
  • Easy to clean with standard mild detergents
  • Extended plastic barrier protects nozzles from possible contamination
  • Nozzles stay retracted when not in use

What's in the Box?

  • A Step-By-Step Instructions Guide
  • Official Taztool™ Warranty
  • 0.65m Stainless Steel Hose
  • Metal T-Connector
  • 1 Teflon Tape Roll
  • 1 Rubber Washer
  • 4-Way Wrench for fastening

INSTALLATION SO EASY A CAVEMAN COULD DO IT

1- PREPARE YOUR TOILET

Remove your existing toilet seat, then turn off the water supply and drain the tank by flushing the toilet.

Disconnect the water supply hose from the toilet tank fill valve

2- INSTALL YOUR T-CONNECTOR

Connect your T-valve to the toilet tank fill valve, then reconnect the water supply hose to the bottom of the T-valve.

3- INSTALL YOUR SHATTAF 2.0

Place the bidet on the back of the toilet so that the nozzles are centered in the bowl thenline up the adjustable bracket with the bolt holes.

Place your toilet seat on top of your
SHATTAF 2.0 and secure it using original hardware.

4- CONNECT THE ENDS

Connect both ends of the bidet hose to the open side of the T-valve and to the water inlet of your SHATTAF 2.0

Check that connections are properly secured, and slowly turn the water supply back on while checking for leaks

Frequently Asked Questions

1. Do the nozzles "get in the way"?
SHATTAF 2.0 nozzles are retracted and covered so you won’t contaminate them when not in use. Plus, we built in a self cleaning system so the nozzles are rinsed before each use.
2. Do i need electricity to use SHATTAF 2.0?
Nope! No electrical outlet required. SHATTAF 2.0 is mechanically powered, using the water pressure in your pipes to operate.
3. Will it fit my toilet?
SHATTAF 2.0 is designed to fit all toilets, both round and elongated including most one-piece and curved toilet fixtures.
4. Is the water used clean?
Yes! It is the same clean water used for your sink and shower
5. How do i dry off?
After you’re done washing simply pat dry with a few squares of toilet paper to finish the job. You will be reducing your toilet paper usage by up to 75%.

You May Also Like

Bundle & Save

 
Powered By Pumper
5, 10, 20,
default, amount, amount,
1, 2, 3,
{ "Default Title":{"price":"4999","compare_at_price":"6999","id":"44694091464982","quantity":"375","inv_p":"continue","inv_m":"shopify"} }
{ "Default Title":{"price":"4999","compare_at_price":"6999","id":"44694091464982","quantity":"375","title":"Default Title","inventory_policy":"continue","inventory_management":"shopify"} }
{ "Default Title":{"id":"44694091464982"} }